The closed, numbered from 1/4 to 4/4 series “Camp Ant” was planned as a one-off project. Crowbars “Camp Ant” are distinguished by a lower weight than most of their brethren, a 6 mm (0.24″) thick blank made of DLC-coated Rigor steel, which is easy to sharpen in field conditions. The weight parameters have been maintained, among other things, thanks to the use of a custom handle brown micarta. The knife comes with a ‘F.D.E. Fall’ Kydex holster decorated with pictograms typical of the series: ant, bonfire, tent. The Kydex is attached to the belt thanks to a brown leather loop, and a nice addition to the whole is a bead from the same micarta that appears on the handle. The type of subtly hollow grind used is also important for the blade’s construction, visible in the form of grooves on the blade, known from previous implementations and appreciated by users. A novelty in comparison to previous versions of Crowbar is the shortening of the false blade to facilitate the process of batoning wood.
The knife has a unique number “Crowbar 3/4” on the blank, distinguishing it from other versions of the series.
Crowbar for Your Survival
With a massive blade and a total length of 320 mm (12.60″), it can handle extreme off-road tasks. It will effectively replace an ax when chipping wood. Felling small trees, chopping limbs, baring larger pieces will not be a problem with the use of this knife. Clearing up the area for the camp (machete function) is also a task that it can fully cope with. The Crowbar is a knife you can rely on universally for heavier work, but also for more subtle tasks such as slicing, cutting, etc.
About MK Knives & Tools
MK Knives & Tools – Marcin Kampka. Knife designer and knifemaker. His knives are characterized by outstanding workmanship and exceptional attention to detail. Knives with a highly recognizable line, style and colors are great for a variety of tasks: everyday, survival, bushcraft, tactical and general outdoor. In addition to the usable sphere, the visual setting and the variety of workmanship, especially appreciated by collectors, are of great importance in MK projects. Particular attention should be paid to the treatment of each project as a unique whole. Each knife presents its individual features, but holsters also have their distinguishing features. Holsters are finished as carefully as the knives themselves, which strongly distinguishes them in the knife world. The knifemaker approaches his work with patience and full commitment. Especially the first of these features develops while practicing the fishing hobby, because as we know, nothing refreshes the mind as much as a distraction, even a temporary one that will allow you to relax in a different than everyday environment.
Crowbar “Camp Ant”
Unmatched Durability: A Knife Built to Last
The presented Crowbar knife is made of one piece of Rigor steel. It is a knife with a full-tang construction, where the steel runs along the entire length and width of the handle to which the covers are attached. Rigor is a universal tool steel of European production from the Uddeholm steelworks. This steel is characterized by good abrasion resistance and high cracking resistance. It is easy to sharpen in field conditions.
To enhance its resilience and protect against corrosion, the knife boasts a black DLC coating. This Diamond Like Carbon coating, boasting a remarkable hardness of approximately 90 HRC, fortifies the steel and enhances its anti-reflective properties. Crowbar Knife combines strength, durability, and superior corrosion resistance.
Grinds and blade shape for effective cutting
The knife blade has been profiled in the drop point style. This design helps to make the best use of the really large blade. It should be noted that the slightly curved design of the knife (arc from the end of the handle to the tip of the blade) in combination with a properly profiled, undercut handle gives the whole a more aggressive character and, if necessary, allows you to better use the force put into a sweeping cut when chopping, for example, a larger piece of wood, etc. A curiosity in the execution of the knife is the innovative hollow grind. It is visible at first glance in the form of characteristic grooves on both the correct blade and the false blade. The concavity of the grind is very subtle and, in addition to the visual effect, is designed to support the cutting process (it reduces the effect of the material sticking to the blade and facilitates splitting of the material).
On the back of the blade there is a jimpig, which makes it easier to press the blade of the knife to the material being cut. This element enables precise cuts, makes it easier to guide the cutting edge along the material and helps with cuts that require pressure.
Durable ergonomic knife handle
Grips of the handles with an ergonomic, oval shape are made of custom micarta with G10 liners. Both materials are resistant to moisture, temperature changes, most solvents and acids, has a high resistance to mechanical damage. G10 in the knife has a rough structure that prevents the handle from slipping in the hand. The handle covers have been screwed together with steel screws. The screws complete the knife’s design, elegantly matching the style of blade. What is important in the construction of the handle is the rounded spine, protruding from each side of the handle, made of the steel protruding beyond the outline of the G10 cladding. According to some users, this procedure makes the handle even more grippy, and certainly stronger, due to the greater width of the steel in this place.
At the end of the knife handle there is a hole for attaching an additional cord, which can be used as a protection against dropping the knife during work, or an additional gripper that facilitates removing the knife from the holster. Originally, it includes a section of paracord with a shade matched to the design.
Pin with paracord attached to it, can be used to attache your favourite ornament e.g. knife bead.
Safely Carry in Style: The Reliable Kydex Holster
Experience the ultimate in impact resistance and moisture resistance with the hand-formed Kydex holster designed for your knife. Crafted to withstand scratches and various weather conditions, this holster is also highly resistant to chemicals.
Easy Attachment Options: The holster conveniently attaches to your belt using a textile loop. Equipped with pass-through holes, it offers the flexibility to secure it to a backpack or tactical harness using cordage, paracord, or even a paracord section matching the knife’s design.
Tactical Flexibility: For tactical enthusiasts, a Kydex optional buckle is available for belt or MOLLE attachment. Please note that the buckle is not included in the original set but can be purchased separately HERE*.
* The buckle designed by the knifemaker is compatible with MOLLE solutions. The buckle is installed by disassembling the module with the nylon grommet beforehand.
Specification
- Blade: fixed blade (full tang), drop point style blade with groove grind, plain cutting edge
- Steel: Rigor 61 HRC), finish: black DLC coating
- Handle: brown custom micarta, Desert Tan G10 liners
- Sheath: kydex sheath “F.D.E. Fall” + brown color additions
- Contents: knife with knife bead, sheath, MK sticker, MK patch, certificate, packaging box
- Dimensions: total length: 320 mm | 12.60″, blade length: 178 mm | 7.00″, blade thickness: 6,0 mm | 0.24″, handle length: 142 mm | 5.59″
- Weight: 405 g | 14.28 oz without sheath , 503 g | 17.74 oz with sheath
- Product code: MK-06.0035
- Producer: MK Knives & Tools, Poland
Warranty
Knives are covered by a lifetime warranty. This warranty provides protection against defects in materials and workmanship. The warranty applies to both the knife and its sheath. If the product covered by this warranty fails due to a manufacturing defect the producer will repair it without charge, or replace it, at our discretion. Only original, unaltered and unmodified items are covered by this warranty.
The warranty does not cover damage caused by accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over an extended period of time and use. Damage not covered under the warranty may be repaired for a reasonable rate. In such cases, a fee will be also charged for shipping. If you have any questions please contact us.
Maintenance
- Remember! Every of our knives are extremely sharp, so be careful when handling them!
- Do not use your knife for something besides it’s intended purpose! Do not use the knife as a can opener, screwdriver, chisel, hammer, crowbar etc.
- After using your knife with sea water, blood, fruits or other corrosive mediums, always rinse the knife with fresh water and dry it off.
- Do not wash the knife with harder chemicals or in the dishwasher. This may damage or destroy the knife.
- Before storing your knife, apply thin film of high-quality gun oil or special knife oil or wax to knives. We recommend that you always keep your knife and sheath clean and dry when not in use.
- Always keep your knife sharp, so it can always take care of you.
Reviews
There are no reviews yet.